Diffusers. Grilles and manifolds. Valves and controllers.

emcoair ventilation components

Diffusers. Grilles and manifolds. Valves and controllers.

Discover our wide range of diffusers. With emcoair you have the choice: either integrated smartly and unobtrusively, or prominently displayed as a design feature. There is a wealth of possibilities!

Find out more

Loading products ...

emcoair Swirl diffuser model DAL358

DAL358

emcoair Swirl diffuser model DAL358

The DAL358 allows ideal adaption of the air supply system to the room conditions. The cylinder elements, integrated into the front plate, make it possible to adjust the airstream to any desired pattern, even after installation. A favourable air flow distribution at the cylinder elements allows for high velocity discharges at low noise levels.

  • Icon
  • Icon
emcoair Swirl diffuser model DAL359

DAL359

emcoair Swirl diffuser model DAL359

The DAL359 allows ideal adaption of the air supply system to the room conditions. The large number of air conducting elements, with optimised airflow and acoustic characteristics makes it effective in managing high cooling loads in areas with low ceilings. The gradual step-by-step reduction of the cross section outlet of the air supply elements makes it possible to adjust the settings in volume flow and discharge temperatures even after installation.

  • Icon
  • Icon
emcoair Swirl diffuser model DRS

DRS

emcoair Swirl diffuser model DRS

The DRS diffuser is a highly inductive swirl diffuser with a round or square front plate and pressed air control blades and an integrated steel diffuser. The device is suitable for use in commercial and industrial areas and can be installed flush or suspended from the ceiling. The swirl diffuser is usually operated via a plenum box but can also be installed directly at the end of the pipe with an integrated perforated metal element

  • Icon
  • Icon
emcoair Ceiling air diffuser model DIA

DIA

emcoair Ceiling air diffuser model DIA

The DIA diffuser is a highly inductive swirl diffuser with a round or square front plate for operating universally in comfort as well as industrial areas. The high inductive horizontal air flow with its flat characteristics guarantees a rapid reduction in temperature and velocity and that areas with low ceilings and high cooling loads, the required comfort in occupied areas is ensured.

  • Icon
  • Icon
emcoair Ceiling air diffuser model MPC

MPC

emcoair Ceiling air diffuser model MPC

The emcoair MPC is a diff user (feed air/exhaust air) with a perforated front plate for installation in ceilings. It is available in three versions for different flow types such as displacement flow (source air), radial flow dispersion along the ceiling or variable airflow directions (air outlet 1-4 sides). The flow type can be changed subsequently simply by replacing the air control element. A fold-down front panel mounted with quick-release locks makes inspection and cleaning easy.

  • Icon
  • Icon
emcoair Ceiling air diffuser model MSA

MSA

emcoair Ceiling air diffuser model MSA

Model MSA is an adjustable ceiling diffuser with a square front plate and integrated, parallel slot sections with eccentric cylinder made of ABS and straightening profiles. The diffuser can be used in both continuous and open ceilings. The ability to rotate the eccentric cylinder, even after installation, makes it possible to achieve any desired type of jet stream.

  • Icon
  • Icon
emcoair Slot diffuser model SALS

SALS

emcoair Slot diffuser model SALS

Slot diffuser SAL-S is a slot diffuser manufactured with 35 mm profile width. It is made completely of aluminium extruded profiles and is operated via a plenum box. The SAL-S diffuser can solve many tasks of air conditioning in comfort areas. It generates a horizontal jet with rapid temperature and velocity reduction, and therefore fulfils all comfort requirements in occupied areas.

  • Icon
  • Icon
emcoair Slot diffuser model SALV

SALV

emcoair Slot diffuser model SALV

Slot diffuser SAL-V is a slot diffuser manufactured with 35 mm profile width. It consists of aluminium extruded profiles with inserted eccentric or nozzle cylinders of ABS and is operated via a plenum box. Depending on the situation and the volume of air, the diffuser can be manufactured as a multi-row unit and joined together to make slot bands of any desired length.

  • Icon
  • Icon
emcoair Slot diffuser model SAL35

SAL35

emcoair Slot diffuser model SAL35

The SAL35 diffuser is available in single or multi-slot versions, depending on the particular application and air volume and can be joined together to form slot bands of any desired length. Similar to a vortex, a strong vacuum develops causing high flow velocities to form near the surface of the cylinder drum which produces a stable airflow and airflow deflection at low acoustic levels.

  • Icon
  • Icon
emcoair Slot diffuser model SAL50

SAL50

emcoair Slot diffuser model SAL50

"The SAL 50 diffuser is available in the same configuration as the SAL35, the essential difference being the greater profile width, which allows for a greater possible volume flow capacity. Similar to a vortex, a strong vacuum develops causing high flow velocities to form near the surface of the cylinder drum which produces a stable airflow and airflow deflection at low acoustic levels."

  • Icon
  • Icon